
Two resin bound paving quotations can look very different, even when they cover the same area. One may allow for the decorative surface over a prepared base. Another may include removal, groundworks, edging and additional site requirements.
The useful question is therefore more specific than “What is the price per square metre?” You need to establish what each price includes and whether the proposed specification matches your project.
This guide explains how to evaluate resin bound paving cost for a villa entrance, garden path or commercial outdoor area, and what to provide when requesting a quotation.
How Much Does Resin Bound Paving Cost in Saudi Arabia?
There is no single installed rate that describes every project. The quotation needs to account for the proposed system, existing conditions, preparation, layout and working arrangements.
A surface-only price should not be treated as the cost of a complete installation. Before setting your budget, ask whether the quoted amount includes the base, removal of existing materials, borders and any associated drainage work.
For a project-specific discussion, send your site information to Saudi Floors. Include your city, approximate area and photographs of the existing surface.
Make Sure You Are Comparing the Same System
The terms “resin bound” and “resin bonded” are sometimes used interchangeably, but they describe different application methods.
Resin bound surfacing mixes the aggregate with resin before laying. Resin bonded surfacing applies aggregate onto a resin layer. A similar name or stone appearance does not establish an equivalent specification.
Ask each contractor to identify the proposed system and product. This guide concerns the mixed aggregate-and-resin system.
You can also explore Saudi Floors’ resin bound surfacing service when preparing your enquiry.
Start With the Existing Base
Before comparing decorative finishes, establish what lies beneath them.
Describe the current surface and any visible damage. Ask whether it can be retained, what preparation is proposed, and which repairs are included in the quotation. An existing hard surface needs assessment rather than automatic acceptance.
Manufacturer guidance highlights the importance of a sound, prepared base and appropriate detailing.
If the base condition is uncertain, clarify how this will be investigated and how any additional work would be agreed. This is more useful than accepting a low initial figure with an undefined preparation allowance.
Specify How the Area Will Be Used
A garden walkway and a vehicle entrance should not be priced as though their requirements are necessarily identical.
Explain the expected users and traffic before requesting the proposal. Installation depth must suit the application and the selected manufacturer’s specification.
For exposed outdoor areas, ask for product information addressing the proposed conditions, including UV stability where relevant. Avoid treating general descriptions such as “premium resin” as a substitute for an identifiable specification.
Include the Details That Photographs Miss
A reference image explains your preferred appearance. It rarely shows everything needed to price your own site.
Provide a plan identifying curves, planting beds, columns, thresholds and transitions to adjacent paving. If you want multiple colours or decorative divisions, show their location.
Also explain where materials can be unloaded, how the work area is accessed and whether the property will remain occupied. Include working-hour restrictions and areas that require protection.
These details give the contractor a clearer brief and help reduce assumptions in the quotation.
Agree the Drainage Approach
Do not use a description of the decorative surface as a complete drainage specification.
Ask how water will move through or across the proposed construction, where it will discharge, and which base and level details form part of the design. The complete build-up needs to be considered alongside site conditions.
From a budgeting perspective, establish whether drainage adjustments are included, excluded or subject to further investigation.
Compare Scope Before Comparing Totals
Imagine receiving one proposal for surfacing over a ready base and another for removing existing paving and rebuilding the area. The lower total does not demonstrate better value when the work differs.
Use a shared brief and ask both providers to address the same items:
| Quotation item | What to establish |
|---|---|
| System | Named product and proposed specification |
| Area | Agreed measurements and measurement method |
| Preparation | Removal, repairs and base works |
| Finish | Aggregate blend, colour and specified depth |
| Detailing | Edges, joints and transitions |
| Drainage | Included work and exclusions |
| Programme | Sequencing and return-to-use arrangements |
| Commercial terms | Taxes, payment stages and variations |
Pay particular attention to exclusions. Ask how unanticipated work will be assessed and approved before it proceeds.
A clear quotation should help you understand the finished scope without relying on verbal assumptions.
Where Can You Review the Budget?
If the proposal exceeds your budget, discuss design and scope options before changing the technical specification.
You might review decorative complexity, available colour alternatives or optional project elements. Phasing may also be worth discussing where it is practical.
Ask the contractor to explain the consequences of each option. Do not assume that reducing the specified depth or omitting necessary preparation is an acceptable saving.
Record the revised scope in writing so that the final quotation reflects the decisions you have actually approved.
What Should You Send With a Quote Request?
Prepare a short project brief containing:
- Project city and location.
- Approximate area in square metres.
- Pedestrian or vehicle use.
- Existing surface description.
- Overall photographs and close-ups.
- A drawing or layout, if available.
- Preferred appearance and target programme.
For a project with several outdoor areas, identify which zones require resin bound paving and which finishes remain undecided.
You can use this enquiry:
“I am planning resin bound paving in [city] for approximately [area] square metres. The area will be used for [application], and the existing surface is [description]. Attached are site photos and a design reference. Please clarify the proposed system, preparation requirements and quotation scope.”
Send Your Project Brief to Saudi Floors.
Frequently Asked Questions
Does the price include supply and installation?
Check the written scope. Ask whether materials, installation and preparation are included.
Can a final price be provided from photographs?
Photographs support an initial discussion, but further information or a site assessment may be required.
Can an existing concrete base reduce the work required?
Possibly, if it is suitable for the proposed system. Its condition must be assessed first.
Will a driveway cost the same as a pathway?
Do not assume the specification is identical. Explain the intended use when requesting a quotation.
Does the aggregate colour affect the price?
Ask for prices for the available options rather than assuming every blend has the same cost.
Is removal of old paving included?
Only rely on it being included when it appears in the quotation.
What warranty should I expect?
Request any offered warranty in writing, including its duration, coverage, conditions and exclusions.
When can the area return to use?
Obtain instructions for the specified system and installation conditions rather than using a general timeframe from another project.
Request a Quote Based on Your Actual Project
A useful resin bound paving cost comparison begins with an agreed specification and complete scope. That makes it easier to understand the price, review alternatives and decide what to commission.
Planning a villa entrance, landscaped pathway or commercial frontage? Share your project details with Saudi Floors to discuss the proposed surface and request a quotation.
Request a Resin Bound Paving Quote
Call +966 50 088 8750
Email Your Project Information


